BCKBD - LAYOUT FLUID REMOVER

  • MSDS: BCKBD
  • Manufacturer: A W CHESTERTON CO
  • Product Name: LAYOUT FLUID REMOVER
  • National Stock Number: 6810-00N003458
Product Identification

Product ID:LAYOUT FLUID REMOVER
MSDS Date:01/01/1985
FSC:6810
NIIN:00N003458
MSDS Number: BCKBD

Responsible Party
A.W.CHESTERTON,CO.
225 FALLON RD
STONEHAM, MA 02180
US

Cage: 71431

Contractor
CHESTERTON A W CO
STONEHAM, MA 02180-9101 US

Telephone: 781-438-7000/800-535-5053

Cage: 71431

Ingredients

KETONES (TYPE NOT SPECIFIED)

Fraction By Weight: <80%

ACGIH TLV: 1,000 PPM (MFR)


COMPRESSED GAS (TYPE NOT SPECIFIED)

Hazards

Effects of Overexposure:EYE: DAMAGE/IRRIT. VAPOR: DIZZY,NARCOSIS.
INGESTION: HARMFUL OR FATAL.

First Aid

First Aid:EYE: FLUSH WITH WATER 15 MIN,CALL PHYSICIAN.
INHALATION:REMOVE TO FRESH AIR,GIVE ARTIF RESP IF NEEDED,CALL
PHYSICIAN. INGESTION: DO NOT INDUCE VOMITING,CALL PHYSICIAN.

Fire Fighting

Flash Point:0F/-17C (TCC)
Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEMICAL.
Fire Fighting Procedures:SELF-CONT BREATH APP,WATER FOG TO COOL EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:AT TEMPS ABOVE 130F/54C CONTAINERS MAY
VENT,RUPTURE OR BURST.

Accidental Release

Spill Release Procedures:CONTAIN SPILL TO AS SMALL AN AREA AS POSSIBLE.
FLUSH AWAY FROM IGNITION SOURCES WITH WATER. PICK UP WITH ABSORBENT
MATERIAL AND TRANSFER TO SUITABLE CONTAINER FOR DISPOSAL.

Handling

Handling and Storage Precautions:DO NOT STORE IN DIRECT SUNLIGHT OR
ABOVE 120F/49C.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:MECHANICAL/GENERAL
Protective Gloves:ADVISED
Eye Protection:SAFETY GLASSES.
Supplemental Safety and Health
MFR ID CODE* 83300

Chemical Properties

Vapor Pres:130
Vapor Density:>1
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:PHOSGENE AND OTHER TOXIC FUMES.

Disposal

Waste Disposal Methods:BY METHODS CONSISTENT WITH LOCAL,STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.